• 10mm open-ended wrench
• 5, 6mm hex keys
• 15mm pedal wrench
• 15mm socket for axle nuts
• Perfect tool for track bikes
• All you need in one tool
• Overall Length end to end 225mm
• Patented design

Capacity from 10 up to 60 Nm:

this torque range is ideal for the elements of the bicycle with the highest torque specifications (bottom bracket, cassettes). In use, always refer to the torque values specified on technical documents or printed on the parts themselves.

Easy to use:

1. unlock the wrench-end knob by gently pulling it, and set the desired torque value rotating the knob and reading the torque on the scale. After setting the torque value, push the knob back in place, to prevent unwanted changes to the set value while using the wrench
2. depending on the rotation sense of the part you want to tighten, push the square section bar through the wrench head to one side or the other
3. using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached
4. always take the wrench to minimum torque value after use.

Reversible ratcheting head:
reversible ratcheting head, 3/8″ square.

A state-of-the art tool, built to last:
functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 10-60 has been conceived and produced in Italy. The tool has laser-etched iscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.

Calibration service:
the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service we offer in our laboratories at the cost of 35€ plus shipping expenses (may vary depending on the countries: check terms & conditions with the national distributor). After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.

Bits sold separately

Capacity from 2 up to 16 Nm:
this is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.

Easy to use:

1. set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other)
2. insert the appropriate bit (depending on the bolt you need to tighten)
3. using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached
4. always take the wrench to minimum torque value after use.

Minimal fixed head:
Giustaforza’s simple, ‘non-ratcheting’ head has been chosen on purpose on this version, to facilitate the tightening of bolts where space is very limited (like seatpost bolts parallel to the seatpost shaft in zero offset models). The head is now smaller than ever, to maximise this advantage.

Lightweight:
the light aluminum body keeps the weight down to a record-breaking sub-180g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.

A state-of-the art tool, built to last:
functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 has been conceived and produced in Italy. The tool is hard-anodized with laser-etched iscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.

Metal box with EVA internals:
with internals in high density EVA foam and an aluminum outer shell, thi box protects the torque wrench against shocks, hosting both the wrench and the bits (bits are only supplied with DELUXE torque wrench versions).

Calibration service:
the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service we offer in our laboratories at the cost of 35€ plus shipping expenses (may vary depending on the countries: check terms & conditions with the national distributor). After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.

The DELUXE version is equipped with a bicycle-specific bit set:
bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard lenght (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.
All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.

Detail of bits:
10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)
3x100mm (HEX4, HEX5, T25)
1x100mm (extension)

Targeted at professional users, it’s the evolution of classic Giustaforza, with a ratcheting head. Red anodized, it’s supplied in a metal box. The DELUXE version is completed with cycling-specific bits.

Capacity from 2 up to 16 Nm: 

this is the best torque range for precision bicycle applications and ‘sensitive’ components. In use, always refer to the torque values specified on technical documents or printed on the parts themselves.

Easy to use:

1. set the desired torque rotating the wrench end knob, reading the torque value on the scale (scale resolution is 0,5 Nm, integers on one side, 0,5 on the other)
2. insert the appropriate bit (depending on the bolt you need to tighten)
3. using the tool, a loud ‘CLICK’ and a 3° free-movement tells when the torque has been reached
4. always take the wrench to minimum torque value after use.

Ratcheting head:
for an higher productivity in professional applications, Giustaforza Pro gets a very small yet highly reliable ratcheting head. 1/4″ square (1/4″ square/hex adapter provided, to be able to use standard bits).

Lightweight:
the light aluminum body keeps the weight down to a record-breaking sub-200g value, less than half the weight of other torque wrenches in this range of torque. This is paramount to get the right feedback at low torque values, without mistaking the effort to hold the tool with the applied torque.A state-of-the art tool,

Built to last:
functional, linear in design and precise in any detail: shouldn’t be a surprise to know that Giustaforza II 2-16 Pro has been designed and produced in Italy. The tool is hard-anodized with laser-etched iscriptions, and it’s built to last. The mechanical, click-type functioning make the wrench extremely shock tolerant and the absence of batteries or electronics furtherly increase its reliability. Each sample is checked and numbered as a single masterpiece.

Metal box with EVA internals:
with internals in high density EVA foam and an aluminum outer shell, thi box protects the torque wrench against shocks, hosting both the wrench and the bits (bits are only supplied with DELUXE torque wrench versions).

Calibration service:
the +-4% tolerance is guaranteed for 5000 cycles (5000 ‘clicks’), then the wrench should be re-calibrated. Calibration is a service we offer in our laboratories at the cost of 35€ plus shipping expenses (may vary depending on the countries: check terms & conditions with the national distributor). After every calibration, the tolerance of +-4% over nominal value will extend for 5000 cycles. After calibration, the wrench will return to the customer with a calibration certificate.

The DELUXE version is equipped with a bicycle-specific bit set:
bits include a 100 mm-long extension, three 100 mm-long bits (hex 4, hex 5 e T25) plus several other Torx and hex bits in standard lenght (25 mm). That covers all the needs of newest Shimano, Sram and Campagnolo high-end groupsets, plus those of reversed-bolt stems.
All bits are manufactured from S2 special steel, with very high (62 Hrc) surface hardness, to ensure maximum durability.

Detail of bits:
10x25mm (HEX2, HEX2.5, HEX3, HEX6, T10, T15, T20, T30, -3/16, +PH1)
3x100mm (HEX4, HEX5, T25)
1x100mm (extension)

A heavy-duty, shop quality pedal wrench designed with two 15mm offset wrench openings positioned for optimal leverage and ease of use. The tool head is made of a stamped, CNC machined, and heat-treated steel plate and has an integrated bottle opener. 100% aluminum handle is CNC machined for precision, strength, and durability.

• Allen wrenches: 2/2.5/3/4/5/6mm
• T25 Torx Bit k Phillips Screwdriver
• Sockets: 8/9/10/11/12/13/14/15mm
• Hardened steel and engineering grade plastic materials
• Pre-set torque valve
• LCD display
• Auto off
• Torque range: 4-80Nm
• Size: 33.4x3.2x2.8cm
• Weight: 430g
• MTB
• Road

Features:

• Adjustable from 3 – 15 Nm
• Easy to use locking mechanism
• ¼ inch drive works with Pedro’s Bit Set

• A precision machined 15mm spanner for tracknuts, while a broad, flat, palm-shaped handle gives you a lot of leverage without needing a long, heavy grip.

• There's a bottleopener on the bottom, too (to encourage you to carry it at all times).

• Surly's Jethro Tule pocket tool is crafted from stainless-steel, then polished to a high luster.

• The Jethro Tule fits nicely on a key chain and is light enough to carry comfortably anywhere.

• Just screw it on your derailleur hanger
• Set your chain into the cog and away you go
• Works well in conjunction with the Fireeye Single Speed Kit (SSK) sold separately
• Material: aluminium 6061-T6 and stainless steel
• Surface finish: CNC machined, brushed and anodized
• Logo: lasered

• Covers a torque range of 3-15Nm.
• More accurate than cheaper (and cheaply made) alternatives.
• Reads in precise increments of 0.4Nm with an accuracy of ±4%.
• Includes ¼ inch M3, M4, M5, M6 Hex, socket extensions and T25 & T30 sockets.
• Lets you dial in not more, not less but that exact tightness.

• 3 pack
• Part XTTL001

Now On-Sale! Buy super useful PRO bike-specific Torque Wrench if safety & precision are a concern.

Most riders actually overtighten all of their expensive and delicate precision parts, which is like a time-bomb waiting to go off with a 'SNAP'!

Tightening the bolts on your stems, seatposts, 2-piece chainsets, etc, will have them at their optimum and safe torque rating.

Add to cart if you want piece of mind and never want to risk the chance to strip an expensive stem or other precise component again or have a part fail at the worst time.

Features:

1. Covers a torque range of 3-15Nm.

2. More accurate than cheaper (and cheaply made) alternatives.

3. Reads in precise increments of 0.4Nm with an accuracy of ±4%.

4. Includes inch M3, M4, M5, M6 Hex, socket extensions and T25 & T30 sockets.

5. Lets you dial in not more, not less but that exact tightness.

Pedros Tyre Levers ROCK!
 

• The industry favorite for several years (found in the racing pits of many famous riding teams)
• Every lever is made from the strongest composite plastic available
• The chisel tip makes it easy to insert beneath the bead, and the slightly thicker shape keeps the tire lever from slipping out
• The tough handle makes it easy to remove the tightest of tires
• Brilliantly well-designed tyre levers
• Box section design makes these levers almost indestructible!
• Chisel tip gets under the toughest beads and laughs at tyres that used to make your old levers CRY, BEND, & BREAK!
• SUPERIOR leverage! Just the right length to remove even the stiffest tyres.(No More Cursing on the side of the Road!)
• The BEST doesn't need to be expensive!

A six-inch diameter, extra powerful magnet keeps small parts safe and easy to access.

Lifetime warranty.

• the Tour de Beauce in the humidity of Quebec
• the Fitchburg-Longsjo Classic in the New England rain
• the U.S. National Cross-Country Championships in the dust of Northern California

• Natural proprietary ingredients helps to prevent corrosion.
• Works best in mixed or wet conditions.
• Safe for the earth, water, pets, plants, and people.
• Race-proven chain lubricant made from natural, renewable resources.
• 4oz/120ml bottle.

• Chainj - Medium-viscosity, vegetable/synthetic lubricant specifically formulated for mixed-to-wet riding conditions.
• Engineered for longer life and superior performance in wet weather.
• A slight negative charge associates ionically with metal surfaces for added life and increase anti-wear properties.
• Biodegradable.

• Durable 1.8 Gallon/7 Liter bucket with lid
• Logo bag for separate storage of dry/wet items
• Frame/wheel brush
• Toothbrush; ideal for cogs, derailleurs and chainrings
• Large, durable sponge
• Microfiber towel for drying and polishing
• 2 tire levers
• Folding Hex Set with screwdrivers: 2.5, 3, 4, 5 and 6 mm hex wrenches, plus flat-blade and Phillips screwdrivers
• Pedro's Bike Care and Cleaning Guide
• Room to add your favorite Pedro's lubricant, cleaner, degreaser and polish

• Low-viscosity,engineered to penetrate well into the chain to provide mess-free lubrication and protect metal surfaces from oxidation and wear. 
• Higher lubricity means metal surfaces slide easier, reducing friction and increasing efficiency. Biodegradable.

 
• 5mm hex key & flat-bladed screwdriver with chain tool and 3.2, 3.3 and 3.5mm spoke wrenches.
• Made of heat-treated tool steel.
• Easy to use, yet so small, there’s no excuse not to carry one.
• Weight: 80g
• Lifetime warranty