Mudguards

The Topeak DeFender FX Front Fender is designed for mountain bikes with suspension forks. It comes in two halves.

The front half is higher than the back. It attaches to the fork via a quick release that fits under the fork crown. On and off in seconds.

Made from injection-molded nylon. The fender is 23" long by 3.5" wide by 6" tall. The weight is 180g.

Features

• The Topeak DeFender M2 Rear Fender has an ultra-secure quick release mounting system that easily adjusts from 25.4 to 34.9mm, easily fitting standard and oversized seat posts.
• The two-pivot arm articulates for impoved tire coverage and perfect bike fit.
• The Topeak DeFender M2 Rear Fender features a stiff engineering grade plastic support frame that is co-molded to a softer more flexible material at the trailing edge for greater durability.

The Topeak Defender fenders are the perfect compliment to any mountain bike.

Special design allows rear fender to be adjusted to fit both hard-tails and full suspension bikes.

Quick release seat post attachment means you can install and remove fender in seconds.

• Wide profile for maximum coverage.
• Fully adjustable in height and angle.
• Cool motocross profile.
• Durable injection molded nylon construction.
• Quick release.

• Easily clips-on to the specified rack
• Keeps the mud off your back and your rack-pack
  
• Saves space compared to a standard, separate rear mudguard
• Topeak specific for custom fit
• Fits MTX and EX beam racks only
• Made of highly durable composite plastic for long life & economy
• Weighs only 62g for lightweight, all-weather protection

The DeFender™ R1 and R2 offer road riders great protection from water and road spray in a tough, versatile lightweight package.

The fenders are constructed of lightweight polycarbonate with stainless steel struts for stiffness and durability.

The unique quick release mounting system is fast and easy and requires no tools using a combination of flexible rubber connectors, adjustable seat stay bands and center bolt clip to optimize strut alignment and positioning.

Fits road tires up to 700 x 23c.

No tools required, clip the Croozer III on and cruise on, even in the mud!

The adjustable rubber straps fit down tubes up to 75mm in diameter, and can accommodate ovals, or hydro formed tubes.

The bracket can be secured and adjusted on any type of seat post ( 25 to 32 mm).

Quick and easy mounting , no tool required. Thumblock lever.

Adjustment : multi positions angular adjustment. Installation and adjustment of the angle without tools.

• Attachment and fixation clip in technopolymer.
• Material : technopolymer Blade width : 45 mm
• Weight: 150 g

Features:

• Compatible with all traditional ATB forks and most ATB suspension forks. Instant on/off.
  
• Compatible with V-brakes.
  
• Easy one step installation by mounting the blade in steer tube.
  
• Attachment and fixation clip in technopolymer. Material : technopolymer Blade width : 62 mm Weight : 135 g

• Blade width : Road: 35 mm / 1.4'' / VTC, hybrid: 45 mm / 1.8''
• Colours : Black or silver
• Material : Thermoplastic resin
• Mounting : Quick Fix system
• Mounting : Universal quick assembly
• Stays assembly : Pre-mounted on blades with Z-Clip

• The bracket can be secured and adjusted on any type of seat post ( 25 to 32 mm).

• Quick and easy mounting , no tool required.

• Very good resistance to all type of usage.

• Thumblock lever. Adjustment : multi-position angular adjustment.

• Installation and adjustment of the angle without tools.

• Optimal protection of the rider. Attachment and fixation clip in technopolymer.

• Material : technopolymer Blade width : 70 mm

• Weight : 170 g

• CAB SYSTEM: Concept Anti Blocking. The new mono clip connecting the front stays on the fork comply with EN 14764 standard.

• In case an object gets into the spokes of the front wheel, the stays will be automatically released and will not block the wheel.

• Z CLIP: Patented quick, safe and adjustable assembly system for mudguards with stays.

• The stays that are crossing the clip can slide and be adjusted easily. Once adjusted, and secured with the screw, the stays can be cut and covered with a cap.

• STEEL BRIDGE: The standard choice. Stays mounting standard system with steel bridge.

• Rust free stainless steel bolts and nuts.

• Thermoplastic resin stay fit full length guards using Z Clip stay mounting system and CAB system on the front.

• CAB SYSTEM: Concept Anti Blocking. The new mono clip connecting the front stays on the fork comply with EN 14764 standard.

• In case an object gets into the spokes of the front wheel, the stays will be automatically released and will not block the wheel.

• Z CLIP: Patented quick, safe and adjustable assembly system for mudguards with stays.

• The stays that are crossing the clip can slide and be adjusted easily.

• Once adjusted, and secured with the screw, the stays can be cut and covered with a cap.

• STEEL BRIDGE: The standard choice. Stays mounting standard system with steel bridge.

• Rust free stainless steel bolts and nuts.

• No tool required 
• Thumb lock lever 
• Multi positions angular adjustment
• Primary activity: Road, MTB, comfort, kids bikes 
• Material: Technopolymer
• Blade width: 70 mm 

• CITY & HYBRID FRONT & REAR SET
• Built-in spoilers.
• Compatible V-Brake.
  
• Mounting : front: adjustable L shape steel
  
• Bracket rear: adjustable L shape steel bracket and clip-on frame
  
• Blade width : 45 mm
  
• Material : technopolymer
  
• Weight : 225 g